README for LMK03328EVM EEPROM, EVM-Default EEPROM Image Data, 8/28/2015

---------------------------------------------------------------------
FILES				DESCRIPTION

* README.TXT			This file

* LMK03328EVM_EEPROM.epr	LMK03328EVM Default EEPROM Image Data. Import into TI's CodeLoader Software tool, or view with text editor (Notepad, etc.)

---------------------------------------------------------------------
GENERAL NOTES

TI's CodeLoader Software can be used to program the LMK03328 device registers and non-volatile EEPROM on the LMK03328EVM via I2C interface.  The LMK03328EVM EEPROM was pre-programmed during EVM test to support 6 default EVM start-up configurations (6 EEPROM page settings) in Soft Pin Mode.

LMK03328EVM_EEPROM.epr contains the Default EEPROM Image data that was pre-programmed to the LMK03328.  In case the original EEPROM image was overwritten and needs to be restored on the EVM, this .epr file can be imported in TI's CodeLoader Software tool to re-program the LMK03328.

Please refer to the "LMK03328EVM CodeLoader Software User's Guide" (SNAU185) for instructions on EEPROM Programming Flow using the "Import EEPROM File" option.

---------------------------------------------------------------------
LINKS

LMK03328EVM CodeLoader Software User's Guide
http://www.ti.com/lit/pdf/snau185

CodeLoader Software for Device Register Programming
http://www.ti.com/tool/codeloader

LMK03328EVM Tool Folder
http://www.ti.com/tool/lmk03328evm


---------------------------------------------------------------------
SUPPORT

http://e2e.ti.com/support/clocks/default.aspx